Lantech 2204F Series User Manual page 84

6.26.5 PoE detection

Ping Check: Enable the check function .

SMTP: Enable this option to make sure you want when switch ping fail, it will send
the alarm message via email.

Port No.: The index of PoE ports.

Ping IP address: Input the IP address of PD.

Interval Time: Define the interval time of ping command

Retry Time: Define the retry time when switch ping the PD fail

Failure Log: The log about fail times

Failure Action: Define the behavior after the switch ping the PD fail.

Reboot Time: Define the delay time of rebooting procedure.

And then, click to carry into effect.
Apply
77