Lantech 2204F Series User Manual page 66

6.20.2 Static Filtering
Multicasts are similar to broadcasts, they are sent to all end stations on a LAN or VLAN.
Multicast filtering is the function, which end stations can receive the multicast traffic if the
connected ports had been included in the specific multicast groups. With multicast
filtering, network devices only forward multicast traffic to the ports that are connected to
the registered end stations.

IP Address: Assign a multicast group IP address in the range of 224.0.0.0 ~
239.255.255.255.

Member Ports: Tick the check box beside the port number to include them as the
member ports in the specific multicast group IP address.

Click
Add
IGMP Configuration interface
to append a new filter of multicast to the field, or select the filter in the
59