Advantech RSB-3710 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Single board computers
  5. RSB-3710
  6. User manual
Advantech RSB-3710 User Manual

Advantech RSB-3710 User Manual

Rockchip arm cortex-a72 2.5 sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
RSB-3710
Rockchip ARM Cortex-A72 2.5"
SBC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RSB-3710 and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech RSB-3710

Summary of Contents for Advantech RSB-3710

  • Page 1 User Manual RSB-3710 Rockchip ARM Cortex-A72 2.5”...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 1 x Heatsink  1 x China RoHS  Ordering Information Part No. Description RSB-3710CO-XNA1E RSB-3710 2GDDR, 16GeMMC, 0 ~ 60 °C (32 ~ 140 °F) RSB-3710 2GDDR, 16GeMMC, -20 ~ 85 °C (-4 ~ 185 RSB-3710WO-XNA1E °F) RSB-3710 User Manual...
  • Page 4 Antenna cable SMA(F)/MHF 15cm 1750007990-01 Antenna 4G/LTE full band L=11 cm 50 Ohm SQF MICRO SD C10 MLC 8G (-25 ~ 85 °C/-13 ~ 185 SQF-MSDM1-8G-21C °F) * Please contact us to get suitable cellar module for your region.  RSB-3710 User Manual...
  • Page 5 The equipment has been dropped and damaged. The equipment has obvious signs of breakage. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. RSB-3710 User Manual...
  • Page 6 RSB-3710 User Manual...

  • Page 7: Table Of Contents

    Debug Port Setting..............27 Chapter Software Functionality ......29 Introduction ..................... 30 Set up Build Environment................ 30 3.2.1 Install Docker ................30 3.2.2 Acquiring the Base Image............30 3.2.3 Acquiring the Android Source Code..........30 3.2.4 Building Android 7.1.2 Image............31 RSB-3710 User Manual...
  • Page 8 GPIO ....................... 32 UART ...................... 33 3.4.1 RSB-3710 Uart ................33 Audio....................... 34 SD/MMC Card/USB Disk ................ 35 3.6.1 Browse the SD................35 HDMI ....................... 35 3.7.1 HDMI resolution ................35 3.7.2 HDMI Audio ................36 Multi-display .................... 36 3.8.1 Enter U-boot Interrupt Mode ............

  • Page 9: Chapter 1 General Information

    Chapter General Information...

  • Page 10: Introduction

    In addition, this innovative solution features diverse I/O — including dual GbE, 2 x serial ports, 2 x USB, and 12 x GPIO. RSB-3710 also features Mini-PCIe, and SIM card slots for integrating Wi-Fi, Bluetooth, and 3G/4G modules. RSB-3710 is an ideal solution for applications in healthcare, security, IoT gateways, and vending machines.

  • Page 11: Electrical Specifications

    Operating temperature: 0 ~ 60 °C/-20 ~ 85 °C (32 ~ 104/-4 ~ 185 °F)  Operating humidity: 5 ~ 95% relative humidity, non-condensing  Storage temperature: -40 ~ 85°C (-40 ~ 185 °F)  Storage humidity: 60 °C (140 °F) @ 95% RH Non-condensing  Block Diagram RSB-3710 User Manual...
  • Page 12 RSB-3710 User Manual...

  • Page 13: Chapter 2 H/W Installation

    Chapter H/W Installation This chapter details RSB-3710 mechanical and connector infor- mation.

  • Page 14: Jumper And Connector Locations

    Generally, you simply need a standard cable to make most connections. Warning! To avoid damaging the computer, always turn off the power supply before setting jumpers. RSB-3710 User Manual...

  • Page 15: Jumper List

    LVDS VDD 3.3V &5V level select & LVDS BKL PWR 3.3V&5V PWR select Part number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Setting Function (1-3) LVDS VDD 5V (3-5) LVDS VDD 3.3V (4-6) LVDS BKLT PWR 3.3V (2-4) LVDS BKLT PWR 5V RSB-3710 User Manual...
  • Page 16 PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Setting Function (3-5) Maskrom mode (5-6) Normal mode Power on system under ATX mode (1-2) Note! Users who select ATX mode can power the system on using short BTN Pin 1 and BTN Pin 2. RSB-3710 User Manual...

  • Page 17: Connectors

    Power BTN pin header Reset button DCIN1 12V DC Jack CN11 UIO1 CN12 UIO2 2.3.2 Connector Pin Definition 2.3.2.1 RTC Battery Connector (BAT) RSB-3710 supports a lithium 3V_210mAH CR2032 battery with a wafer box. Figure 2.1 DC RTC Battery Connector RSB-3710 User Manual...
  • Page 18 2.3.2.2 HDMI Connector (HDMI1) RSB-3710 supports one HDMI port. The pin definition for HDMI1 is demonstrated below: Description Description HDMI1_z_DATA2+ HDMI1_z_CLK- HDMI1_z_DATA2- HDMI1_z_CEC HDMI1_z_DATA1+ HDMI1_DDC_CLK HDMI1_z_DATA1- HDMI1_DDC_DATA HDMI1_z_DATA0+ +5V_HDMI HDMI1_z_DATA0- HDMI1_HPD HDMI1_z_CLK+ Figure 2.2 HDMI Connector RSB-3710 User Manual...
  • Page 19 To avoid damage to LCD panel when connecting to an LVDS, please ensure the cor- rect voltage level has been set before powering the device on (refer to jumper setting description for the BL and/or LCD datasheet used in the application). Description LVDS_PWM LVDS_BLEN +VDD_BKLT Figure 2.3 LVDS Inverter Power Connector RSB-3710 User Manual...
  • Page 20 2.3.2.4 LVDS Connector (LVDS) RSB-3710 features an LVDS 20x2-pin board-to-board connector for one port single channel 24 bit LVDS or one port dual channel 24 bit LVDS. To avoid damage to LCD panel when connecting to an LVDS, please ensure the correct voltage level has been...
  • Page 21 Figure 2.4 LVDS Connector RSB-3710 User Manual...
  • Page 22 2.3.2.5 Ethernet Connector (LAN1) RSB-3710 provides one RJ45 LAN interface connector. This connector is compliant with 1000 base-T IEEE 802.3ab, 100 base-TX IEEE 802.3u, and 10 base-T IEEE 802.3.The Ethernet ports use a standard RJ-45 jack connector with LED indicators on the front side.
  • Page 23 2.3.2.6 Ethernet Connector (LAN2) RSB-3710 provides one RJ45 LAN interface connector. This connector is compliant with 1000 base-T IEEE 802.3ab, 100 base-TX IEEE 802.3u, and 10 base-T IEEE 802.3.The Ethernet ports use a standard RJ-45 jack connector with LED indicators on the front side.
  • Page 24 2.3.2.7 Mini PCIE (MINIPCIE) RSB-3710 supports mini-PCIE interface. Detailed Pin definitions are displayed below. Signal Name Signal Name PCIE_z_WAKE# +3.3V_PCIe PCIE_z_REQ# UIM_PWR UIM_DATA CK_z_NGFF- UIM_CLK CK_z_NGFF+ UIM_RST W_DISABLE# PERST_M# NGFF_PCIE_RX- NGFF_PCIE_RX+ NGFF_PCIE_TX- NGFF_PCIE_TX+ USB_MINIPCIE_N USB_MINIPCIE_P +3.3V_PCIe +3.3V_PCIe LED_WWAN# +3.3V_PCIe RSB-3710 User Manual...
  • Page 25 Figure 2.7 Mini PCIE Connector RSB-3710 User Manual...
  • Page 26 2.3.2.8 NANO SIM Card Slot (SIM) RSB-3710 supports on board NANO SIM socket is for 4G integration. Please insert valid SIM card to dial to 4G network. Description SIM_VCC SIM_RST SIM_CLK SIM_DATA Figure 2.8 NANO SIM Card Slot RSB-3710 User Manual...
  • Page 27 2.3.2.9 Audio (AUDIO) RSB-3710 supports Line-out and Mic-in interface. The LOUT pin definition is detailed below. Description LOUTLC_M LOUTRC_M GND_A Figure 2.9 LOUT Connector MIC — a detailed pin definition is displayed below. Description MIC_IN1_P GND_A Figure 2.10 MIC Connector...
  • Page 28 2.3.2.10 USB Type A Connector (USB1) RSB-3710 provides one standard USB 3.0 port, and one standard USB 2.0 Type A connector along the coastline. Description +USBV1 USB_D1- USB_D1+ USB3X0_z_RX- USB3X0_z_RX+ USB3X0_z_TX- USB3X0_z_TX+ +V5_USB5 USB_D2- USB_D2+ Figure 2.11 USB Port Connector...
  • Page 29 (Advantech number: 1700021565-11). Description COM2_TXD COM2_RXD Figure 2.12 COM2/DEBUG Connector 2.3.2.12 Micro SD Slot (SD) RSB-3710 supports SD/MMC card in Class 2, 4, 6, 8, and 10. Its supports a capacity of up to 64GB. Signal Name SDMMC0_z_D2 SDMMC0_z_D3 SDMMC0_z_CMD +V3V_SD...
  • Page 30 USB_OTG+_X USB_OTG_ID_X Figure 2.14 Micro USB Connector 2.3.2.14 Power Button and LED (BTN) RSB-3710 uses a 2x3 pin header to support a power button, power LED lights, and 4G LED lights. Pin Name PWR_BTN (PWR_BTN+) (PWR_BTN-) Figure 2.15 Power Button, Power LED, and 4G LED Pin Header...

  • Page 31: Led

    RSB-3710 features a reset button on its coastline. Description +V3.3A +VPP_OTP GND_F GND_F Figure 2.16 Reset Button 2.3.2.16 DC Power Jack (DCIN1) RSB-3710 supports a DC-Jack header that can be connected 12V external power input. Description +12V Figure 2.17 DC Jack Name Description PWR_LED...

  • Page 32: Uio1 And Uio2

    UIO1 and UIO2 RSB-3710 supports UIO-40 express UIO1. Their pin definitions are displayed below: UIO1: Signal Name Signal Name 5V_USB1 USB_z_P1_DM USB_z_P2_DP USB_z_P1_DP USB_z_P2_DM +V5_USB2 GPIO1 GPIO2 GPIO3 GPIO4 +V5_USB3 USB_z_P3_DM USB_z_P4_DP USB_z_P3_DP USB_z_P4_DM +V5_USB4 UIO2: Signal Name Signal Name...

  • Page 33: Mechanical

    Mechanical 2.6.1 Board Dimensions Figure 2.18 Board Dimensions (Top Side) RSB-3710 User Manual...

  • Page 34: Quick Start Guide

    Quick Start Guide 2.7.1 Debug Port Connection Connect the debug cable to RSB-3710 debug port. Connect the other side of the debug cable to your PC directly or via a USB-to- RS232 cable. RSB-3710 User Manual...

  • Page 35: Debug Port Setting

    Open HyperTerminal on your Windows PC, and select the settings as shown in the following figure. Insert the power adapter connector to the DC jack on RSB-3710 to power on the board. The bootloader prompt is displayed on the terminal screen.
  • Page 36 RSB-3710 User Manual...

  • Page 37: Chapter 3 Software Functionality

    Chapter Software Functionality This chapter details the software programs on the RSB-3710 plat- form.

  • Page 38: Introduction

    Introduction The purpose of this chapter is to introduce the software development of RSB-3710. This is so users can develop their own application(s) efficiently. RSB-3710 is designed for Linux host exclusively. Therefore, developing your app on a Windows/Android host PC may result in failure. At present, this device’s host ver- sion is Ubuntu 16.04 LTS 64bit.

  • Page 39: Building Android 7.1.2 Image

    Execute the Android launch command. The setup in this example is for the produc- tion image of Advantech RISC platform devices with a user debug type. If you are using an RSB-3710, you will be sent the following command: “lunch rk3399_rsb3710- userdebug.

  • Page 40: Gpio

    EXP2_3 GPIO9 EXP2_4 GPIO10 EXP2_5 GPIO11 EXP2_6 GPIO12 EXP2_7 Export GPIO then use control GPIO from user space through sysfs. Export GPIO1. $ echo 504 > /sys/class/gpio/export Set GPIO direction to in/out. $ echo "out" > /sys/class/gpio/gpio504/direction RSB-3710 User Manual...

  • Page 41: Uart

    Usually the UART RTS signal is used to switch the transmitter on and off. 3.4.1 RSB-3710 Uart COM Name Device Node Remark COM0 /dev/ttyS0 support RS232, no flow control COM2 /dev/ttyS2 Debug Port COM4 /dev/ttyS4 support RS232, no flow control RSB-3710 User Manual...

  • Page 42: Audio

    Audio Launch “Sound Recorder” for MIC. Launch “Video” for Audio. RSB-3710 User Manual...

  • Page 43: Sd/Mmc Card/Usb Disk

    SD/MMC Card/USB Disk 3.6.1 Browse the SD Launch “Explorer” to browse the SD card or USB disk. HDMI 3.7.1 HDMI resolution Starting Android, Enter Settings->Display->HDMI->HDMI Resolution. RSB-3710 User Manual...

  • Page 44: Hdmi Audio

    When the HDMI monitor supports audio, the default output is from both HDMI and onboard audio codec. Multi-display RSB-3710 supports 3 x display ports — eDP, LVDS (mipi to LVDS), and HDMI. Only two ports can function at the same time. Supported Default Displays:...

  • Page 45: Hdmi And Lvds

    To set LVDS as main display: set in u-boot as shown below: setenv prmry_screen lvds-g070vw01 setenv extend_screen hdmi-default saveenv reset Network Setup 3.9.1 Wi-Fi Click Settings. Turn on Wi-Fi. RSB-3710 User Manual...
  • Page 46 Choose ESSID (for example, Advantech for guest). Input the correct password. Connect to Wi-Fi. RSB-3710 User Manual...

  • Page 47: Bluetooth

    Click any available devices you wish to pair with. Users can communicate with devices after pairing successfully. 3.9.3 3G/4G Insert SIM card, restart. If you can’t connect to the network, please check the following settings: Settings/More/Cellular networks/ Access Point Names, then Correct. RSB-3710 User Manual...

  • Page 48: Ethernet

    3.9.4 Ethernet RSB-3710 support two Ethernet (eth0 and eth1), but Android only supports to config eth0 as following: Config eth0: Click Settings Settings->More->Ethernet Configure Ethernet There are two of IP setting: DHCP IP and static IP. DHCP IP - configuration is controlled by system.
  • Page 49 Static IP - There are five fields need to be filled: IP Address, netmask,,getway dns1 and dns2. RSB-3710 User Manual...
  • Page 50 Config eth1: Eth1 setting static ip example $ su # ip rule add from all lookup main pref 9999 # ifconfig eth1 172.12.1.2 netmask 255.255.0.0 RSB-3710 User Manual...

  • Page 51: Advantech Services

    Chapter Advantech Services This chapter introduces Advant- ech’s design-in services, techni- cal support, and warranty policy for the RSB-3710 evaluation kit.

  • Page 52: Risc Design-In Services

    RISC Design-in Services Advantech RISC Design-in Services help customers reduce the time and work involved with designing new carrier boards. We handle the complexities of technical research and greatly minimize the development risks associated with carrier boards. Easy Development Advantech delivers support firmware, root file-system, BSP, and other development tools to customers.
  • Page 53 R&D costs and hardware investment. By virtue of a cooperative relationship with leading original manufacturers of CPUs and chipsets — such as ARM, TI, and NXP — Advantech helps solve communication and technical support difficulties. This can reduce the uncertainties in product devel-...
  • Page 54 I/O and perfor- mance. Advantech also offers software evaluation and peripheral module recommen- dations (such as Wi-Fi, 3G, and BT). At this stage, Advantech seeks to resolve customer concerns. Product evaluation with a focus on performance and specifica- tion is vital during the planning period.

  • Page 55: Contact Information

    In addition to verifying a product's functionality, testing a product's efficiency is an important stage for RISC platforms. Through an efficient verification process, backed by Advantech's technical support, customers optimize their applications with ease. Advantech's team can provide professional consulting services regarding further test- ing and equipment usage.

  • Page 56: Repair Process

    Cross-Shipment excludes any damage incurred during shipping as well as custom- ized and/or built-to-order products. For those products which are not DOA, the return fee to an authorized Advantech repair facility will be at the customers' expense. The shipping fee for refurbished products from Advantech back to customers' sites will be Advantech's expense.
  • Page 57 CPU, DRAM, and CF Card. If you return these parts (because you believe they may be part of the problem), please note clearly that they are included. Otherwise, Advantech is not responsible for any items not listed. Make sure the “Problem Description” is enclosed.
  • Page 58 "Our Ref". Advantech reserves the right to deny repair services to cus- tomers that do not return the DOA unit or sign the P/I. Meanwhile, Advantech will scrap defective products without prior notice if customers do not return the signed P/I within 3 months.
  • Page 59 RSB-3710 User Manual...
  • Page 60 No part of this publication may be reproduced in any form or by any means — electronic, photocopying, recording or otherwise — without prior written per- mission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2021...

Table of Contents