Table of Contents
Advertisement
5. Pipes may only be replaced by copper tubing in compliance with standard EN 12735-1.
6. Leak detection, in the case of pressure testing:
- Never use oxygen or dry air, as the risk of fire or explosion is present.
- Use dehydrated nitrogen or a nitrogen and refrigerant mix indicated on the manufacturer's plate.
- For units equipped with pressure gauges, the test pressure must not exceed the gauges' maximum
allowable pressure rating.
7. For high pressure circuit pipes made with copper tubing having a diameter = or > 1 5/8", the supplier
will be requested to submit a certificate 2.1 in accordance with standard EN 10204, which will be filed in
the installation's technical file.
8. The following conditions will result in the cancellation of CE marking compliance, which shall fall
under the liability of the individual who carried out these modifications -
a) Parts replacement with anything other than genuine Baxi spares.
b) Modifications of any sort to the refrigerating circuit.
c) Replacement of refrigerant by a fluid other than that indicated in the instructions.
d) Use of the unit outside the application limits defined in the documentation.
9. The technical information, relative to the safety requirements of the various applicable directives, is
indicated on the manufacturer's plate of the unit.
Page 27
All descriptions and illustrations provided in this leaflet have been carefully prepared but we reserve the right to make changes and improvements
in our products which may affect the accuracy of the information contained in this leaflet. All goods are sold subject to our standard Conditions
of Sale which are available on request.
BAXI
A Trading Division of Baxi Heating UK Ltd (3879156)
A Division of Baxi Group
Brooks House, Coventry Road, Warwick. CV34 4LL
Service support and Technical support 0844 871 1568
Website www.baxi.co.uk
e&oe
Advertisement
Table of Contents
