Baxi Ambiflo 75 Installation, Service & Maintenance Instruction page 19

Note:
i) This is a diagrammatical representation of the underfloor air vent position. Please refer to the appropriate
instructions from the manifold supplier for details.
ii) Please refer to the manifold manufacturer#s instructions regarding return water temperatures and use
parameter 30 to carry out any necessary adjustments.
iii) Please refer to the manifold manufacturer#s instructions regarding flow rate of the underfloor system. Use
the hydraulic pump curve to give the correct value.
Fig. 6
Page 13
3.6 Residential System 'Ambiflo™ Heat pump & Heater module' 1 Zone Radiators