Table of Contents
Advertisement
3.2 Residential System 'Ambiflo™ Heat pump & Heater module' 1 Zone floor
Note:
i) This is a diagrammatical representation of the underfloor air vent position. Please refer to the appropriate
instructions from the manifold supplier for details.
ii) Please refer to the manifold manufacturer? instructions regarding return water temperatures and use
parameter 30 to carry out any necessary adjustments.
iii) Please refer to the manifold manufacturer? instructions regarding flow rate of the underfloor system. Use
the hydraulic pump curve to give the correct value.
Fig. 3
Page 10
3.3 Residential System 'Ambiflo™ Heat pump & Heater module' Variant A - 1 Zone
floor
Advertisement
Table of Contents
