Table of Contents
Advertisement
NOTE: All Control/Sensor cables are 0.5mm
grounded at Ambiflo™ Electrical Heater end only)
* Please note the 5kW Electrical Heater has separate instructions. Please refer to these for details of the
unit and its siting requirements as this can be fitted either to the rear of the Baxi Ambiflo™ Heat Pump
unit, or sited remotely. Kits are available to hydraulically and electrically connect the 5kW Electrical
Heater to the Ambiflo™ Heat Pump unit. Please refer to the accessory list on page 5 for kit details and
Fig 1 for details of the kits available for each Ambiflo™ model.
Fig. 12
2
twisted pair (AWG 20). Maximum length 20 metres (shield
Advertisement
Table of Contents
