Front Wheel Hub Tightening; Tapered Nuts - Linhai LH400ATV-2B Owner's/Operator's Manual

16. MAINTENANCE
WHEEL） M12X1.25
Rear （ALUMINIUM
WHEEL） M12X1.25
NOTE: All nuts that have a cotter pin installed must be serviced by an
authorized Dealer.

Front Wheel Hub Tightening

Front wheel bearing tightness and spindle nut retention are critical component
operations. Service work must be performed by an authorized dealer.
Tapered nuts: install with tapered side against wheel.
Air Filter Service
Air Filter Service
1. Remove seat.
2. Release clips and remove cover.
3. Loosen clamp and remove
Filter.
4. Remove fabric type pre-filter
from main filter. Wash pre-filter in
soapy water and dry it.
5. Reinstall pre-filter over main filter. Replace main filter as required.
OWNER'S/OPERATOR'S MANUAL
LH400ATV-2B
69Ft.Lbs 95N.m
08.0
16-12