Cargo Weight Distribution - Linhai LH400ATV-2B Owner's/Operator's Manual

11. CARRYING LOADS
 CARGO WEIGHT DISTRIBUTION should be 1/3 on the front rack and 2/3
on the rear rack. When operating over rough or hilly terrain, reduce speed
and cargo to maintain stable driving conditions. Carrying loads on one rack
only increases the possibility of vehicle tip over.
 HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS.
Use extreme caution when applying brakes with a loaded vehicle. Avoid
terrain or situations which may require backing downhill.
 ALL LOADS MUST BE SECURED BEFORE MOVING VEHICLE.
Unsecured loads can create unstable operating condition, which could
result in loss of control of vehicle.
 LOADS MUST BE CARRIED AS LOW ON THE RACKS AS POSSIBLE。
Carrying loads high on the racks raises the center or gravity of the vehicle
and creates a less stable operating condition. When cargo loads are
carried high on the racks, the weight of the loads must be reduced to
maintain stable operating conditions.
 OPERATE ONLY WITH STABLE AND SAFELY ARRANGED LOADS.
Avoid handling off-centered loads which cannot be centered. Always
attach the tow load to the hitch point designated for your ATV.
 EXTREME CAUTION MUST BE USED. Avoid operating with loads
extending over the rack sides. Stability and maneuverability may be
adversely affected, causing the vehicle to overturn.
 DO NOT BLOCK THE HEADLIGHT/TAILIGHT AND THE REFLECTORS
when carrying loads on the racks.
 DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS.
Vehicle should never exceed 10 mph (16km/h) while towing a load on a
level grass surface. Vehicle speed should never exceed 5 mph(8km/h)
when towing loads in rough terrain, while cornering, or while ascending or
descending a hill
OWNER'S/OPERATOR'S MANUAL
LH400ATV-2B 08.0
11-2