Linhai LH400ATV-2B Owner's/Operator's Manual page 57

12. RIDING
CAUTION
If you ATV becomes immersed,take it to your dealer before starting the
engine.Major engine damage can result if the maching is not thoroughly
inspected.
If it is impossible to take it to a dealer before starting, follow the steps outlined
below.
 Move the ATV to dry land or at the very least, to water depth not more than
8 inch (200mm).
 Turn the fuel valve to "OFF".
 Remove the spark plug.
 Loosen the carburetor drain screw (1)
 Turn the engine over several
times with electric start.
 Dry the spark plug and reinstall
or replace with a new plug.
 Tighten the carburetor drain
screw(1)
 Turn the fuel valve to "ON".
 Attempt to start the engine. If
necessary repeat the "drying"
procedure.
 Take the machine to your dealer for
service as soon as
possible whether you succeed in starting it
or not.
If water has been ingested into the CVT system, take the ATV to your dealer
for service as soon as possible
OWNER'S/OPERATOR'S MANUAL
LH400ATV 08.0
12-9