Cooling System; Radiator Coolant Level Inspection - Linhai LH400ATV-2B Owner's/Operator's Manual

OWNER'S/OPERATOR'S MANUAL
LH400ATV-2B 08.0
7. CONTROL AND PARTS FUNCTIONS
The recovery bottle, located under the seat, must be maintained between the
minimum and maximum levels indicated on the recovery bottle.
The engine coolant level is controlled or maintained by the recovery system.
The recovery system components are the recovery bottle, radiator filler neck,
radiator pressure cap and connecting hose.
As coolant operating temperature increases, the expanding (heated) excess
coolant is forced out of the radiator past the pressure cap and into the recovery
bottle. As engine coolant temperature decreases, the contracting (cooled)
coolant is drawn back up from the tank past the pressure cap and into the
radiator.
NOTE: Some coolant level drop on new machines is normal as the system is
purging itself of trapped air. Observe coolant levels and maintain as
recommended by adding coolant to the recovery bottle. We recommends the
use of a 50/50 mixture of high quality aluminum compatible anti-freeze coolant
and distilled water.
NOTE: Always follow the manufacturer's mixing recommendations for the
freeze protection required in your area.

Cooling System

WARNING
Never remove the pressure cap when the engine is warm or hot. Escaping
steam can cause severe burns. The engine must be cool before removing the
pressure cap.

Radiator Coolant Level Inspection

NOTE:This procedure is only
required if the cooling system
has been drained for maintenance
and/or repair. However, if the
7-7