Advertisement
OPERATION
Controller
LED display
Heater button
Bubble button
Up button
LED Display
Once the spa is turned on, press RESET on the PRCD. The LED will
display the current water temperature.
Note:
The actual water temperature may vary from the temperature
displayed on the LED screen by approximately 1 °C.
Heating
•
•
•
Press the HEATER button to turn the heating system on/off.
If the light on the heater button is red, the heating system is
activated.
If the light on the heating button is green, the water is at the set
temperature and the heating system is at rest, keeping the water at
the desired temperature.
Filter button
Timer button
Down button
15
Advertisement
