Advertisement
ASSEMBLY
WARNING: Always ensure the spa is unplugged before beginning any
maintenance work to avoid the risk of injury or death.
1.
Move the entire package to the selected site. Do not drag the spa tub across the
ground as this can cause damage and future leakage. Open the carton carefully as this
can be used to store the spa during long term storage or when not in use.
2.
Lay out all the parts on the ground and make sure they are all accounted for. Make
sure the spa tub is right side up.
3.
Spread out the spa tub over the ground and point the drain valve towards a suitable
draining area.
4.
Heater Resetting
Please reset the heater when the spa is used for the first time or after long periods of
storage.
Find the yellow ring as shown in the picture. Pull it down gently and then release it.
Note:
The heater cannot work or be reset
when the water temperature or
ambient temperature is higher than
38°C.
Inside
control
panel
11
Advertisement
