Advertisement
6.
Use a clean towel to wipe up any remaining water and moisture on the spa tub and
controller.
Spa Tub Cleaning
After the spa water is drained, use a sponge and a mild soap solution to wipe away any soil
or stains on the inside of the spa wall. Rinse thoroughly before refilling with clean water.
Important: Do not use steel wool, hard brushes or abrasive cleaners.
Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1.
Clean and dry the area to be repaired thoroughly.
2.
Apply glue (not included) to the PVC patch and quickly attach it onto the damaged
surface.
3.
Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes.
22
Pin hole
Advertisement
