Advertisement
5.
Spa Inflation
•
Plug the spa into the grounded supply socket.
•
Press the RESET button on the PRCD, the screen on the controller will show
numbers.
•
Turn the inflation knob to the inflation status ON and long press (>2 minutes) the
bubble button on the controller to start inflating until the yellow section of the
manometer is pushed out.
•
Stop pressing the bubble button and turn the knob back to OFF for activating other
functions.
Note:
Your spa will require additional air to be added from time to time. Changes in
temperature from day to night will change the pressure in the spa and may cause a
certain amount of deflation.
Spa Deflation
•
Unscrew the manometer cap on the spa pool to deflate
the spa.
•
Once the deflation is completed, replace the cap back.
12
Off
Yellow
Advertisement
