Raven CR7 Calibration Manual page 22

SETUP TRACTOR PROFILE IN GARAGE | CR7 AUTOSTEERING | RAVEN EUROPE GENERIC
Measure and enter the height of the
antenna.
64
Press next step.
Measure and enter the antenna offset (if the
antenne is not mounted in the center).
65
Press next step.
Measure and enter the distance between the
rear axle and the antenna.
66
Press next step.
Measure and enter the Hitch offset from the
center (if the hitch is not in the center of the
67
machine).
Press next step.
Raven Industries Inc. PAGE 22/24 | Calibration manual | 016-8000-015EN | Rev. A