Raven CR7 Calibration Manual page 14

CALIBRATE ISO RAVEN STEERING CONTROLLER | CR7 AUTOSTEERING | RAVEN EUROPE GENERIC
When the machine is in the right place, the
triangle gets green and it is possible to press
Calibrate. Before pressing calibrate, make
33
sure the whole machine (including the cab) is
completely not moving, shaking or so.
Press Calibrate.
The system is calibrating the Gyro.
34
Make sure the machine and the cabine is
standing still when calibrating is in progress!
Calibration of the Gyro has been completed.
35
Press next step.
36
The next step is to calibrate the Wheel Angle
Sensor Value. This can only be done when
driving between 1.6 – 6.4 km/h.
Make sure the speed is between those limits
and turn the steering wheel to the left.
Raven Industries Inc. PAGE 14/24 | Calibration manual | 016-8000-015EN | Rev. A