Raven CR7 Calibration Manual page 16

CALIBRATE ISO RAVEN STEERING CONTROLLER | CR7 AUTOSTEERING | RAVEN EUROPE GENERIC
41
Hold the steering wheel on the right and
press the 'Voltage' underneath right. The
current voltage is setup as the right voltage
(check if the voltage on right changes to the
current voltage).
Press next step.
Setup the Disengage sensor. First step is to
42 select the Disengage sensor Type. Press the
box underneath the Disengage type.
When a complete Raven Europe
Autosteering system is installed, a Pressure
43
Transducer (4 – 20 mA) is mounted.
Select this transducer in the dropdown list.
Make sure this Disengage typ is in the box.
44
Press next step.
Raven Industries Inc. PAGE 16/24 | Calibration manual | 016-8000-015EN | Rev. A