Safety Considerations - Carrier XCT7 40VH A-7G Series Installation And Owner's Manual

Hrv
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Safety Considerations

Sign Definition
Respectful user,
Thank you for choosing and trusting Carrier Air Conditioner. For your better reading of this
manual and facilitated operation of air conditioner, we offer hereunder definitions of signs to be
found in this manual:
WARNING: serious accident in form of killing of life or heavy injury is highly
possible when erroneous installation practice take place.
CAUTION: possibly leading to serious accident.
PROHIBITED: practice prohibited.
• Careful reading of this manual prior to operating Carrier heat recovery ventilation device is
strongly recommended.
• Please refer to this manual in case the problems or product failure occur.
• Keep this manual for future reference in case you do not know how to fix certain operational
problems.
• This device unit belongs to the "jeopardy due to proximity" device group.
• In case any heat reclaim ventilation is resold to any new user, this manual shall also be
resold to the same.
• Prior to installation work, careful reading of the "Safety Notices" in this manual is recommended
to guarantee correct practice.
• Notices listed below are divided into "Warnings" and "Cautions". Issues possibly leading to
serious accidents in form of killing of life or heavy injury due to erroneous practices are
exclusively listed in the "Warnings" column. However, issues listed in the "Caution" column
may also cause serious accidents. In all, both warnings and cautions deeply involve safety
considerations and shall be strictly observed.
• Concerned installation specialists shall teach users how to correctly use and maintain the device
unit after normal operation has been confirmed through test run following completion of
installation.
• Designated MP (service point) shall be asked for in case of expected installation exercise or
servicing demand so that accidents in form of electric shock and fire caused by incorrect user
practice can be avoided.
• Make sure that the device is installed in places where the weight of the same can be properly
and adequately borne. Besides, the device must not be mounted on non-special metal structures
(e.g., anti-theft wire-mesh) as such structures with non-adequate strength may cause the device
to fall and cause casualty.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xct7 40vh015a-7g-qeeXct7 40vh026a-7g-qee

Table of Contents