Features - IDTECH ViVOpay VP5200 User Manual

The VP5200 supports USB and serial (RS-232) host communication using the command protocol
defined in the NEO 2 Interface Developers Guide. This comprehensive guide describes all firmware
commands and other features available in ID TECH's NEO-series devices. It is the authoritative source
for technical information of interest to systems integrators (contact your ID TECH representative to
obtain a copy of this guide). A feature-rich, Windows-based Universal SDK is also available to aid in
rapid development of applications that communicate directly with the VP5200.
Be sure to check the Downloads section on the ID TECH
demos, utilities, SDK updates, white papers, and other downloads, all of which are freely available
without registration.

2. Features

The VP5200 supports the following features:
ICC reader with landing contact
•
Contact EMV Level 1 certified
•
o Contact EMV Level 2 certified, using ID TECH's proven Common Kernel
Dual head MSR reads up to 3 tracks of data (Bi-Directional), with JIS-1 and JIS-II support
•
(for single-side magstripe card)
State-of-the-art encryption support
•
o Triple DES
o AES
o TransArmor RSA
Support for DUKPT key management per ANSI X9.24
•
TR-34 Remote Key Injection Protocol
•
RoHS 2, and REACH compliance
•
Battery for maintaining real-time clock
•
1-year manufacturer's warranty
•
This document assumes that users are familiar with their host systems and all related functions.
ID TECH ViVOpay VP5200 User Manual
Knowledge Base for the latest VP5200
Page | 5