Vp5200: Physical/Mechanical Characteristics; Vp5200: Durability And Reliability Specs - IDTECH ViVOpay VP5200 User Manual

Command Set
Host Interfaces
Firmware/Application
Download
2.4. Physical/Mechanical Characteristics
Item
Physical Dimensions:
VP5200 Reader
Structure Material
Housing Color
Weight
Environmental Characteristics
Category
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Transit Humidity
Operating Environment
ESD
Note: Cables/connectors must be fully isolated with insulating material to prevent ESD discharge.
2.5. Durability and Reliability Specs
Item
Magnetic Head
Smartcard connector
Impact Rating
Ingress Resistance
Remote key injection, and application download using PKI
Secure commands (PKI) for configuring device (RTC, whitelist, reset device, etc.)
Reference the NEO II Interface Developers Guide - 800139403-002
RS-232, USB-HID
USB Vendor ID: 0x0ACD
USB Product ID: 0x4472
Use host interfaces to download firmware/application
113 mm from back of mounting surface x 72 mm flange width x 72 mm flange
height (LxWxH)
Plastic, PC+20% GF UL 94V-0
Black
0.2 kg
Support
-25° C to 70° C (-13° F to 158° F), max change of 10° C per hour
-40° C to 80° C (-40° F to 176° F)
10% to 95% non-condensing
10% to 95% non-condensing, duration 3 months
5% to 95% non-condensing, duration 1 week
Water resistant for indoor and outdoor use, with conformal coating.
Contact ±6kV
Air discharge ±12kV
Specification
500,000 insertions minimum
500,000 cycles minimum
IK08
IP54, the gasket and drain design at host end are necessary
ID TECH ViVOpay VP5200 User Manual
Page | 7