Table of Contents
Advertisement
AT-TQ6602 Access Point User's Guide
Configuring the Management VLAN
118
Here are the guidelines to setting the management VLAN:
When the management VLAN is disabled, the default setting, the
access point handles untagged packets as members of VLAN 1.
When the management VLAN is enabled and set to VID 1, the
default VID, the access point accepts only tagged packets and
discards all untagged packets.
When Management VLAN Tag is enabled and Management VLAN
ID is a value other than 1, packets from wireless clients on VAPs
with the VID 1 are handled as untagged packets. This is also true
for packets from clients that are dynamically assigned the VID 1
from a RADIUS server.
Note
Changing the management VLAN might end your management
manasession.
To configure the management VLAN, perform the following procedure:
1. Select Settings > LAN from the main menu. Refer to Figure 36.
Figure 36. LAN Settings Window
When you select Enable in the Management VLAN Tag field, the
window in Table 37 on page 119 appears.
Advertisement
Table of Contents
