Mode Selection - Sharp EL-5160S Operation Manual

*1 Press j x and then choose a memory to
clear one variable memory.
*2 Formula memories and defi nable memories. See
"Memory Calculations".
*3 Statistical data (entered data)
*4 Matrix memories (matA, matB, matC, and matD)
*5 List memories (L1, L2, L3, and L4)
*6 Cleared when changing between sub-modes in
STAT mode.
*7 See "Memory clear key".
*8 The username you stored using the name display
function will be cleared as well.
Memory clear key
Press @ P to display
the menu.
• To initialize the display
settings, press 0 .
The parameters are set as follows:
• Angular unit: DEG
• Display notation: NORM1
• N-base: DEC
• To clear all variables and memories (A−F, M, X, Y,
F1−F4, D1−D4, ANS, STAT, matA−D, and L1−L4) at
once, press 1 0 .
• To RESET the calculator, press 2 0 . The
RESET operation will erase all data stored in memory
and restore the calculator's default settings. You can
do the same thing by pressing the RESET switch on
the back of the calculator.

Mode Selection

NORMAL mode: b 0 (default)
Used to perform arithmetic operations and function
calculations.
STAT mode: b 1
Used to perform statistical operations.
→
d
E-8