Set Up Menu - Sharp EL-5160S Operation Manual

DRILL mode: b 2
Used to practice math and multiplication table drills.
CPLX mode: b 3
Used to perform complex number calculations.
MATRIX mode: b 4
Used to perform matrix calculations.
LIST mode: b 5
Used to perform list calculations.
EQUATION mode: b 6
Used to solve equations.

SET UP Menu

Press @ J to
display the SET UP menu.
Press j to exit the SET
UP menu.
Determination of the angular unit
The following three angular units (degrees, radians, and
grads) can be specifi ed.
DEG (°):
RAD (rad): @ J 0 1
GRAD (g): @ J 0 2
Selecting the display notation and decimal places
Five display notation systems are used to display
calculation results: Two settings of Floating point (NORM1
and NORM2), Fixed decimal point (FIX), Scientifi c
notation (SCI), and Engineering notation (ENG).
• When @ J 1 0 (FIX) or @ J 1
2 (ENG) is pressed, "TAB(0–9)?" will be displayed
and the number of decimal places (TAB) can be set to
any value between 0 and 9.
• When @ J 1 1 (SCI) is pressed,
"SIG(0–9)?" will be displayed and the number of
signifi cant digits can be set to any value between 0
and 9. Entering 0 will set a 10-digit display.
E-9
@ J 0 0 (default)