Operating Controls; Power Switch/ Print/ Item Count Mode Selector - Sharp el-2630piii Operation Manual

"OFF": Power off.
" ": Power ON. Set to the non-print mode.
"P": Power ON. Set to the print mode.
"P•IC": Power ON. Set to the print and item count mode.
1. The counter will count the number of times that the
has been pressed in addition.
Note:
 Each time the
subtracted from the count.
 The count is printed when the calculated result is
obtained.
 Pressing of the
counter.
2. When the grand total/rate setting mode selector is in the ON
position (GT), the counter will count the number of times that
the calculation results have been stored in the grand total
memory. To print and clear the count, press the
3. The memory item counter will count the number of times that
the key has been pressed in the addition.
Note:
 Each time the
be subtracted from the count.
8 | P a g e
key is used in subtraction, 1 will be
, , ,
key is used in the subtraction, 1 will
or key clears the
key
key.