Initial Set Up Mode Selection; Set Up Menu - Sharp EL-509E Operation Manual

INITIAL SET UP
Mode Selection
Normal mode (NORMAL): m0
Used to perform arithmetic operations and function calcula-
tions.
Statistics mode (STAT): m1
Used to perform statistical calculations.
When executing mode selection, temporary memories, statis-
tical variables, statistical data and last answer memory will be
cleared even when reselecting the same mode.

SET UP menu

Press " to display the SET UP
menu.
• A menu item can be selected by:
• moving the flashing cursor by using ><, then
press ® (= key), or
• pressing the number key corresponding to the menu item
number.
• If or
to view the previous/next menu screen.
• Press ª to exit the SET UP menu.
[Selecting the Display Notation and Decimal Places]
The calculator has four display notation systems (Floating
point, Fixed decimal point, Scientific notation and Engineering
notation) for displaying calculation results.
• When the FIX, SCI, or ENG symbol is displayed, the number
of decimal places (TAB) can be set to any value between 0
and 9. Displayed values will be reduced to the correspond-
ing number of digits.
• If a floating point number does not fit in the specified range,
the calculator will display the result using the scientific
notation (exponential notation) system. See 'Setting the
Floating Point Numbers System in Scientific Notation' for
details.
• Press ", followed by 0, to display the following sub-
menu:
FIX SCI ENG
0 1 2
is displayed on the screen, press [ or ]
→
NORM1 NORM2
3
]
– E-8 –
FSE TAB
0
4