Operating Controls; Power Switch/ Print/ Item Count Mode Selector - Sharp EL-1750V Operation Manual

OFF
P
P IC
8 | P a g e
POWER SWITCH; PRINT / ITEM COUNT MODE
SELECTOR:
Power Off
Power ON. Set to the non-print mode.
Power ON. Set to the print mode.
Power ON. Set to the print and item count
mode.
1. For addition or subtraction, each time
pressed, 1 is added to the item counter, and
each time
 The count is printed when the
calculated result is obtained.
 Pressing of
counter.
2. When the grand total/rate setting mode
selector is in the ON position (GT), the
counter will count the number of times that
the calculation results have been stored in
the grand total memory. To print and clear
the count, press the
3. The memory item counter will count the
number of times that the
pressed in the addition.
Note: 
 Each time the
subtraction, 1 will be subtracted from
the count.
 The count is printed when the memory
is recalled.
is pressed, 1 is subtracted.
,
key.
key is used in the
is
clears the
key has been