Errors And Calculation Ranges; Errors - Sharp EL-5160S Operation Manual

ERRORS AND CALCULATION RANGES

Errors

An error will occur if an operation exceeds the calculation
ranges, or if a mathematically illegal operation is
attempted. When an error occurs, pressing l or r
automatically moves the cursor back to the place in the
equation where the error occurred. Edit the equation or
press j or @ Z to clear the equation.
Error codes and error types
ERROR 01: Syntax error
• An attempt was made to perform an invalid
operation.
Ex. 2 + & 5 =
ERROR 02: Calculation error
• The absolute value of an intermediate or fi nal
calculation result equals or exceeds 10
• An attempt was made to divide by zero (or an
intermediate calculation resulted in zero).
• The calculation ranges were exceeded while
performing calculations.
ERROR 03: Nesting error
• The available number of buffers was exceeded.
(There are 10 buffers* for numeric values and 64
buffers for calculation instructions).
* 5 buffers in CPLX mode, and 1 buffer for matrix/list
data.
ERROR 04: Data over error
• Data items exceeded 100 in STAT mode.
ERROR 07: Defi nition error
• Matrix/List defi nition error or the attempted entering
of an invalid value.
ERROR 08: DIM unmatched error
• Matrix/List dimensions inconsistent while calculating.
ERROR 09: Invalid DIM error
• Size of matrix/list exceeds calculation range.
ERROR 10: Undefi ned error
• Undefi ned matrix/list used in calculation.
100
.
E-64