Operating Controls; Power Switch/ Print/ Item Count Mode Selector - Sharp EL-1197PIII Operation Manual

Power Switch/ Print/ Item Count Mode Selector

"OFF": Power off.
" ": Power ON. Set to the non-print mode.
"P": Power ON. Set to the print mode.
"P•IC": Power ON. Set to the print and item count mode.
1. The counter will count the number of times that the
has been pressed in addition.
Note:
• Each time the
subtracted from the count.
• The count is printed when the calculated result is obtained.
• Pressing of the
counter.
2. When the grand total/rate setting mode selector is in the ON
position (GT), the counter will count the number of times that
the calculation results have been stored in the grand total
memory. To print and clear the count, press the
3. The memory item counter will count the number of times that
the
Note:
• Each time the
subtracted from the count.
• The count is printed when the memory is recalled.
• Pressing of the
8 | P a g e
key is used in subtraction, 1 will be
,
key has been pressed in the addition.
key is used in the subtraction, 1 will be
key clears the counter.
, , or
key
key clears the
key.