Led On/Off Light Control - Napoleon LV50N2 Installation And Operating Instructions Manual

8.5

LED ON/OFF LIGHT CONTROL

Light function mode is OFF. Cannot operate light function while in this mode.
Light function mode is ON. Can operate light function while in this mode.
NOTE: The remote must be in light function mode to change colours.
A.
WHITE COLOUR
76
°F
Pressing the light function
adjustment button up" " to
single bar will turn on the LED
lights. The initiated light colour
is white.
LOCKS ONTO
D.
COLOUR
76
°F
To lock onto one of the
rolling colours. Press the
light function adjustment
button down " " at the colour
selection. Then instantly
press the button up " ".
B.
76
°F
OFF
P re s s t h e l i g h t f u n c t i o n
adjustment button down
" " to turn OFF the LED lights.
E.
76
°F
OFF
P re s s t h e l i g h t f u n c t i o n
adjustment button down
" " to turn OFF the LED lights.
SCROLLS THROUGH
C.
VARIOUS COLOURS
76
°F
P r e s s t h e l i g h t f u n c t i o n
adjustment button up " " to
single bar and the LED lights
will initiate the rolling colours.
NOTE: Must be within 10
seconds of Step B for this
function to work.
NOTE: After the colour has been
locked, pressing OFF and ON will
start the cycle over with the white
colour. If the light is in the OFF
position and then back to the ON
position, the cycle will begin again
with the white colour. In order to
reset this operation, at any time,
press OFF for a minimum of 10
seconds.
W415-1624 / D / 11.22.16
51
EN