Door Installation / Removal - Napoleon LV50N2 Installation And Operating Instructions Manual

6.2

DOOR INSTALLATION / REMOVAL

DO NOT INSERT FINGERS IN THE GAP BETWEEN THE DOOR AND THE FRAMING EDGE, THERE IS A RISK OF
FRONT - ACCESS SIDE
A. Remove the safety screen assembly, refer to the "SAFETY SCREEN INSTALLATION / REMOVAL"
section for details.
B. Remove the trim piece from the door.
C. For door removal locate the top four door latches forward and away to disengage door latches.
NOTE: Ensure to leave one hand on the glass door during entire door removal.
D. Tilt the top of the door forward 90 degrees, then lift it up and out of the four bottom door latches.
E. Reverse these steps to reinstall the door, ensure the top four and bottom four door latches are
properly engaged prior to releasing the door.
NOTE: Ensure the door opens freely and closes sealed.
IMPORTANT: Once latches are engaged, test to make sure that the door is secure
BACK - SEE THROUGH ONLY
F. Remove the four screws securing the door to the appliance.
G.
Tilt the top of the door forward, then lift it up and out of the bottom door retainer.
H. When re-installing the door, lift onto the bottom door retainer, tilt the top towards the appliance and secure
with the four previously removed screws.
WARNING
!
INJURY DUE TO THE SPRING MECHANISM.
and will not fall forward.
43
EN
W415-1624 / D / 11.22.16