Bootstrap Registers - Toshiba teli BU1207MG Instruction Manual

Bootstrap Registers

This camera is based on USB3 Vision.
Please refer to USB3 Vision specification for details about Bootstrap Registers defined in USB3 Vision.
AIA (Automated Imaging Association) USB3 Vision Homepage.
http://www.visiononline.org/vision-standards-details.cfm?type=11
Followings are commonly used registers.
UserDefinedName
-
UserDefinedName is used for assigning unique ID to the camera.
You can store an arbitrary string into non-volatile memory.
StreamEnable
-
When StreamEnable bit is set. Camera starts to send image streaming.
TeliU3vSDK / TeliCamSDK require some setups on your application in opening and closing the stream
channel. Please refer to the library manual for details.
EventEnable
-
When EventEnable bit is set. Camera is enabled to send event packets.
TeliU3vSDK / TeliCamSDK require some setups on your application in opening and closing the event
channel. Please refer to the library manual for details.
● Registers
USB3 Vision ABRM
Register
ManufactureName
ModelName
FamilyName
DeviceVersion
ManufacturerInfo
SerialNumber
UserDefinedName
SBRM Address
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
GenICam Length
Address
Interface Byte / [bit]
0x00004 String 64
0x00044 String 64
0x00084 String 64
0x000C4 String 64
0x00104 String 64
0x00144 String 64
0x00184 String 64
0x001D8 Integer 8
Access
R Manufacturer name
R Device model name
R Device family name
R Device version
R Additional manufacturer specific information
R Serial number of the device
R/W User defined name of the device.
R Start Address of the SBRM
34 / 161
Description
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm