Table of Contents
Advertisement
- Edge mode (TriggerSequence0)
The exposure time is determined by Exposure Time setting.
- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
- Bulk mode (TriggerSequence6)
Camera exposes and transfers multiple frames by a single trigger.
Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change
by register setting. And you can add delay time from trigger edge to exposure start by register setting.
USB Streaming
For details of Random Trigger Shutter operation, please refer to 'Timing' section in 'Specification'.
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
ExposureTime
Trigger sequence
Trigger signal
Exposure
TriggerAdditionalParameter = 3
Image
Image
TriggerDelay
Trigger Delay
81 / 161
Image
Image
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm
Advertisement
Table of Contents
