Bootstrap Registers - Toshiba teli DDU Series Instruction Manual

Bootstrap Registers

This camera is based on USB3 Vision.
Please refer to USB3 Vision specification for details about Bootstrap Registers defined in USB3 Vision.
AIA (Automated Imaging Association) USB3 Vision website.
http://www.visiononline.org/vision-standards-details.cfm?type=11
Followings are commonly used registers.
UserDefinedName
-
UserDefinedName is used for assigning unique ID to the camera.
You can store an arbitrary string into non-volatile memory.
StreamEnable
-
When StreamEnable bit is set. Camera starts to send image streaming.
TeliU3vSDK / TeliCamSDK require some setups on your application in opening and closing the stream
channel. Please refer to the library manual for details.
EventEnable
-
When EventEnable bit is set. Camera is enabled to send event packets.
TeliU3vSDK / TeliCamSDK require some setups on your application in opening and closing the event
channel. Please refer to the library manual for details.
● Registers
USB3 Vision ABRM
Register
ManufactureName
ModelName
FamilyName
DeviceVersion
ManufacturerInfo
SerialNumber
UserDefinedName
SBRM Address
Copyright © 2019 Toshiba Teli Corpotration, All rights reserved.
GenICam Length
Address
Interface Byte / [bit]
0x00004 String
0x00044 String
0x00084 String
0x000C4 String
0x00104 String
0x00144 String
0x00184 String
0x001D8 Integer
Access
64 R Manufacturer name
64 R Device model name
64 R Device family name
64 R Device version
64 R Additional manufacturer specific information
64 R Serial number of the device
64 R/W User defined name of the device.
8 R Start Address of the SBRM
39 / 172
Description
D4289451A
http://www.toshiba-teli.co.jp/en/