Blacklevel - Toshiba teli BU1207MG Instruction Manual

BlackLevel

This section describes BlackLevel feature. This control adjusts the black level applied to the output signal.
It is adjustable from -25% to +25% as white saturation level is 100%.
If BlackLevel is set lower than 0[%], the image level may not be saturated.
● GenICam Node
Name
BlackLevel
● IIDC2 Register
Register Field
BlackLevel Implemented
Mult
Div
Min
Max
Value
● Control with TeliCamSDK
Camera feature API
Control BlackLevel using dedicated API.
Please refer to [Controlling camera feature functions] in [TeliCamAPI Library manual] for more detail.
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
Black Level
Length
Interface
Byte / [bit]
IFloat 4
Length
Address
Byte / [bit]
0x204040 [31]
0x20404C 4
0x204050 4
0x204054 4
0x204058 4
0x20405C 4
API name
GetCamBlackLevelMinMax
GetCamBlackLevel
SetCamBlackLevel
Access
R/W Black Level value.
Access
R Returns the state whether the function is implemented.
R
Absolute Value [%] = Raw * (Mult / Div)
R
R Returns the minimum value of Black Level Value register.
R Returns the maximum value of Black Level Value register.
R/W Black Level value. (Raw value)
Description
Get minimum and maximum value
Get current BlackLevel value
Set new BlackLevel value
116 / 161
Description
Description
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm