Notes on combination of C-mount lens:
- Depending on the lens you use, the performance of the camera may not be brought out fully due to the deterioration in
resolution and brightness in the peripheral area, occurrence of a ghost, aberration and others. When you check the
combination between the lens and camera, be sure to use the lens you actually use.
- In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be removed.
- As for the C-mount lens used combining this camera, the projection distance from bottom of the screw should use
9mm or less.
Notes on Dropping Frames:
Depends on your PC and USB3.0 interface card configurations, images may not be captured properly (e.g. dropping
frames). In this case, change frame rate setting lower.
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
Bottom of
the screw
C-mount lens
9mm or less
10mm or less
20 / 161
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm