Usersetcontrol - Toshiba teli BU1207MG Instruction Manual

UserSetControl

You are able to save a user setting to the non-volatile or volatile memory of the camera. There are 15 user
memory channels for user setting.
By using user memory, you are able to restore frequent used settings at the time of next start-up.
The following table is the list of registers applied to "UserSetLoad"/"UserSetSave","UserSetQuickSave".
Category
ImageFormatControl
AcquisitionControl
TriggerControl
ExposureControl
DigitalIOControl
(*) DPC and SequentialShutter entries are stored to a single channel. Entries are shared with all channels.
This table lists all features of B/W and Color models. Please refer to [Table : supported features list] as well.
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
Table: List of registers to be applied to UserSet
Register
ImageFormatSelector
Width
Height
OffsetX
OffsetY
Binning
Decimation
Reverse
PixelFormat
TestPattern
AcquisitionFrameRateEnable
AcquisitionFrameRate
AcquisitionFrameIntervalControl
AcquisitionFrameInterval
TriggerMode
TriggerSequence
TriggerSource
TriggerAdditionalParameter
TriggerDelay
ExposureTime
ExposureControl
LineModeAll
LineInverterAll
UserOutputValueAll
LineSelector
LineSource
Category
DigitalIOControl
TimerControl
AnalogControl
LUTControl
EventControl
DPCControl
SequentialShutterControl
128 / 161
Register
AntiGlitch
AntiChattering
TimerTriggerSource
TimerDuration
TimerDelay
Gain
GainControl
BlackLevel
Gamma
BalanceRatio
BalanceWhiteAuto
LUTEnable
EventNotification
DPCEnable(*)
DPCNumber(*)
DPCEntryX(*)
DPCEntryY(*)
SequentialShutterEnable(*)
SequentialShutterTerminateAt(*)
SequentialShutterEntry(*)
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm