Toshiba teli BU1207MG Instruction Manual page 77

● Control with TeliCamSDK
Camera feature API
Control ImageBuffer using dedicated API.
GetCamImageBufferMode
GetCamImageBufferFrameCount
ExecuteCamImageBufferRead
 ImageBuffer
1. Select an Image Buffer mode.
Set 'ImageBufferMode' with 'SetCamImageBufferMode' function.
2. Capture image stream.
To start and stop capturing image is the same way as AcquisitionControl.
Please refer to 'AcquisitionControl' section as well.
3. Read the number of frames in Image Buffer.
Read the number of frames in Image Buffer with 'GetCamImageBufferFrameCount' function.
4. Read Image from Image Buffer.
Start to read Image from Image Buffer with 'ExecuteCamImageBufferRead' function.
5. Receive Image from Image Buffer.
Please refer to [Controlling camera feature functions] in [TeliCamAPI Library manual] for more detail.
GenICam function API
Control ImageBuffer using GenICam API.
 ImageBuffer
1. Select an Image Buffer mode by 'ImageBufferMode'.
Integer value and string value of Enumeration are as follows.
Copyright © 2020 Toshiba Teli Corporation, All rights reserved.
API name
SetCamImageBufferMode
Integer
0(*)
1
Description
Get current ImageBuffer mode
Set new ImageBuffer mode
Get current ImageBufferFrameCount value
Read Image from Image Buffer
String
Off
On
* initial factory setting
76 / 161
D4279014C
http://www.toshiba-teli.co.jp/en/index.htm