BlackLevel
This section describes BlackLevel control of LuminanceControl category of the DU series.
This control adjusts the black level of the image. It is adjustable from -25% to +25% as white saturation level
is 100%. However, when BlackLevel is lower than 0[%], the image level may not be saturated.
● Registers
Register
BlackLevel
Beginner
● Setting
- Set Black Level
Set the following value to "BlackLevel" register. Setting value is Float type.
● Note
Copyright © 2015 TOSHIBA TELI CORPORATION, All rights reserved.
255(@8bit)
Black
Level
0
Fig. Black Level
Visibility
Access
R/W
Sets the absolute Black Level.
BlackLevel
Minimum
Maximum
* initial factory setting = 0.00[%]
saturation level
Description
Value
-25.00[%]
+25.00[%]
55 / 77
http://www.toshiba-teli.co.jp/en/index.htm
D4241130B