Direct IP Idis DC-D Series Installation Manual page 14

Part 1 – Introduction
2
Assemble the cable rubber to the bottom cover.
3
Use the screws, anchors provided with the camera to
secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check the distance
between the screw holes if necessary.
14
4
Connect external devices, the network cable, and
the power adapter.
5
Adjust the angle. For more information, refer to the
Angle Adjustment.
6
Attach the enclosed desiccant to the designated
space inside the dome cover using double-sided
tape as shown below.
Desiccant