Table of Contents
Advertisement
Cell Menu
Current CPU / DRAM Frequency
These items show the current clocks of CPU and Memory speed. Read-only.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level
of the microprocessor whether the computer is running on battery or AC power. This
field will appear after you installed the CPU which supports speedstep technology.
Adjust CPU FSB Frequency
This item allows you to set the CPU FSB frequency (in MHz).
Adjusted CPU Frequency
It shows the adjusted CPU frequency (FSB x Ratio). Read-only.
Advance DRAM Configuration
Press <Enter> to enter the sub-menu.
DRAM Timing by Mode
Setting to [Enabled] enables DRAM CAS# Latency automatically to be
determined by BIOS based on the configurations on the SPD (Serial
Presence Detect) EEPROM on the DRAM module.
CAS Latency (CL)
When the Configuration DRAM Timing by SPD sets to [Disabled], the field is
adjustable. This controls the CAS latency, which determines the timing delay
(in clock cycles) before SDRAM starts a read command after receiving it.
V1.0
Figure 37: Cell Menu configuration
VIG610M Motherboard Manual
59
Advertisement
Table of Contents
