Viglen VIG610M Manual page 16

L – Serial ATA II Connectors
Can connect up to 4 SATA devices (Hard Disk Drive, CD-ROM)
M – Front Panel Connector 2
Controls the Speaker and Power LED
N – USB header
Allows up to 2 USB devices to be connected to each USB header
O – Clear CMOS jumper
This allows you to clear the CMOS of the Motherboard when moving the jumper from
pins 1-2 to 2-3.
P – Floppy Connector
This connector allows you to connect a floppy drive to the chassis.
Q – Serial Port Connector
This connector allows you to connect a serial device to the chassis
R – Front Panel Audio Connector
This header supports HD Audio which allows the Motherboard to support front panel
Audio.
S – CD-In Connector
This connector is provided for external audio input.
T– PCI Slot 32bit
The PCI slots support LAN cards, USB cards and other add-on cards that comply
with PCI specifications.
U – Chassis Intrusion
Notifies before entering OS that the Chassis panel may have been tampered with.
K and L – USB header
Allows up to 2 USB devices to be connected to each USB header
V – PCI Express x1 and x16 Slot
The PCI Express x1 supports up to 250 MB/s transfer rate. The PCI Express x16
supports up to 4.0 GB/s transfer rate.
V- Rear I/O Connector
Consists of multiple components to connect i.e. VGA, PS/2 Keyboard and Mouse.
15
V1.0 VIG610M Motherboard Manual