Table of Contents
Advertisement
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
Figure 12: Chassis Intrusion Connector
S/PDIF-Out Connector: JSPD1
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).
Connect the S/PDIF Out module cable to this connector, and then install the module
to a slot opening at the back of the system chassis.
Figure 13: S/PDIF-Out Connector
CD-In Connector: CD_IN1
This connector is provided for external audio input.
Figure 14: CD-In Connector
26
V1.0
VIG610M Motherboard Manual
Advertisement
Table of Contents
