Viglen VIG610M Manual page 56

On-Chip ATA Devices
Press <Enter> to enter the sub-menu:
 On-Chip IDE Controller
These items allow users to enable or disable the IDE controller.
 PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
 On-Chip SATA Controller
These items allow users to enable or disable the SATA controller.
 RAID Mode
This item is used to enable/disable the RAID function for SATA devices.
I/O Device Configuration
Press <Enter> to enter the sub-menu:
 COM Port 1/2
Select an address and corresponding interrupt for the first serial port.
 Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC] Line Printer port 0
[278] Line Printer port 2
[378] Line Printer port 1
 Parallel Port Mode
This item allows you to select the parallel port mode.
V1.0 VIG610M Motherboard Manual
55