Table of Contents
Advertisement
Installing the CPU
1. The CPU socket has a plastic cap on it to protect the contact from damage.
Before you install the CPU, always cover it to protect the socket pin. Remove the
cap from lever hinge side (as the arrow shows).
2. The pin sockets are revealed, now open the load lever.
3. Lift the load lever up and open the load plate. After confirming the CPU direction
for correct mating, put down the CPU in the socket housing frame. Be sure to
grasp on the edge of the CPU base. Note that the alignment keys are matched.
V1.0
Figure 20: Remove protective cap
Figure 21: Open load lever
Figure 22: Place CPU in the socket housing
VIG610M Motherboard Manual
30
Advertisement
Table of Contents
