Labels - Guardian Fall Protection 11002 Instruction Manual

Labels

OSHA 1926.502, 1910.66
ANSI Z359.14-2012,
A10.32-2012
Made in India
with this product at time of shipment must be read prior to
use. Instructions must be followed for proper use, maintenance and
inspection. Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
REPAIRABLE. POWERFUL SPRING INSIDE, DO NOT REMOVE
USE: Anchorage strength requirement 5000 lbs. (22kN). No free fall is allowed.
SRL must always be positioned at or above harness D-ring. Avoid lifeline contact
with sharp edges. For use by trained persons only. Ensure connection to anchorage
is secured properly before use. May be used as a component of a PFAS in HLL
applications. Design, installation and utilization of HLLs must be supervised by a
www.guardianfall.com
www.guardianfall.com
800.466.6385
WARNING:
Manufacturer's instructions supplied
NOT USER
COVERS. DO NOT REMOVE THIS LABEL.
Qualified Person.
800.466.6385
Front
Webbing: 6' Nylon, 7/8" width
Average locking speed: 4.5 ft./Sec.
Max. arresting distance: 54 in
Average arresting force: 900 lbs.
Max. capacity: 130 - 310 lbs.
Class B SRL
Back
INSPECTION:
Before each use inspect device
per user manual including locking function (pull sharply to
test), retraction function, lifeline function, function and condition of
connectors, housing and fasteners, legibility of labels, and any evidence
of defects, damage, or missing parts. Inspection by a Competent Person
required monthly. Inspect impact indicator for signs of deployment. If
lifeline tag is fully exposed, or if lifeline tag stitching is broken, an impact has
occurred and the unit must be removed from service. If a fall has occurred,
remove the unit from service. DO NOT USE IF INSPECTION REVEALS AN
UNSAFE CONDITION.
Date of First Use
_______/_______
HS Alum. Snap Hooks
11002
HS Steel Snap Hooks
11004
Serial # Mfg. Date (mo/yr)
_______/_______
HS Alum. Rebar Hooks
11003
HS Steel Rebar Hooks
11012
9