V7 E5 Special-Stone
•
Remove the brake pipe coupling from
the rear brake master cylinder
•
Retrieve the screw and the associated
seal washers
•
Remove the vehicle's brake pipe
REMOVING THE REAR BRAKE PIPE (BETWEEN THE BRAKE CALLIPERS AND THE ABS CON-
TROL UNIT)
•
Remove the right lambda probe
•
Remove the ABS modulator support according to the indication in the Modulator section
•
Remove the clamp fastening the brake
pipes to the chassis
•
Open the brae pipe fastener tab
Braking system
BRAK SYS - 285
Need help?
Do you have a question about the V7 E5 Special-Stone and is the answer not in the manual?