Engine from vehicle
•
Disconnect the side stand sensor con-
nector and then remove the wiring har-
ness from the lower side of the vehicle
•
Disconnect the uniball that connects
the gear lever transmission to the ve-
hicle's gearbox
•
Disconnect the uniball that connects
the gear lever to the gear lever trans-
mission
•
Remove the clamp and disconnect the
pipe that connects the tank to the can-
ister. Remove the pipe by extracting it
from the lower side of the vehicle
ENG VE - 178
V7 E5 Special-Stone
Need help?
Do you have a question about the V7 E5 Special-Stone and is the answer not in the manual?