Table 93 Configuration > Link Aggregation > LAG Management > Add (continued)
LABEL
Apply
Cancel
22.2.4 LAG Port
Use this screen to view LAG port settings. Click Configuration > Link Aggregation > LAG Port to open this
screen.
Figure 161 Configuration > Link Aggregation > LAG Port
The following table describes the labels in this screen.
Table 94 Configuration > Link Aggregation > LAG Port
LABEL
LAG Port
LAG
Name
Port Type
State
Speed
Duplex
FlowCtrl State
FlowCtrl Status
Edit
Cancel
22.2.5 LAG Port Edit
Use this screen to edit a LAG port. Click Configuration > Link Aggregation > LAG Port > Edit to open this
screen.
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Displays the LAG index value.
Displays the LAG name.
Displays the port type.
Displays the state as Enable or Disable.
Displays the speed value as Auto, Auto-10M, Auto-100M, Auto-1000M, Auto-10/100M, 10M,
100M, or 1000M.
Displays the duplex value as Full, Half, or Auto.
Displays whether flow control is Enable or Disable.
Displays whether flow control is in use (Enable) or not (Disable).
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Click Cancel to discard the changes.
GS1900 Series User's Guide
154