Oui Settings - ZyXEL Communications GS1900 Series User Manual

Table 81 Configuration > VLAN > Voice VLAN > Global (continued)
LABEL
Voice VLAN ID
Cos/802.1p
Remark Cos/
802.1p
Aging Time
Apply
Cancel

20.4.2 OUI Settings

Use this screen to view the OUI settings. The maximum number of entries is 16. Modifying the OUI table
will restart auto detection of OUI process. Click Configuration > VLAN > Voice VLAN > OUI to open this
screen.
Figure 149 Configuration > VLAN > Voice VLAN > OUI
The following table describes the labels in this screen.
Table 82 Configuration > VLAN > Voice VLAN > OUI
LABEL
OUI
OUI Address
Description
Action
Edit
Delete
Add
Chapter 20 Configuration: VLAN
DESCRIPTION
Enter the global voice VLAN ID. It should be a unique VLAN ID in the system and cannot equal
each port PVID. It is a conflict in configuration if the value equals management VID, MVR VID,
PVID, and so on. The allowed range is 1 to 4094.
Displays the 802.1p packet priority field.
Select to Enable the priority remark function for cos/802.1p.
Enter the voice VLAN secure learning aging time. The allowed range is 10 to 10000000 seconds.
It is used when security mode or auto detect mode is enabled. In other cases, it will be based
on hardware aging time. The actual aging time will be situated between the [age_time; 2 *
age_time] interval.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Displays an OUI address. A telephony OUI address is a globally unique identifier assigned to a
vendor by IEEE. It must be 6 characters long and the input format is "xx-xx-xx" (x is a hexadecimal
digit).
Displays a description of the OUI address. Normally, it describes which vendor telephony device
it belongs to. The allowed string length is 0 to 32.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
Click Add to create a new OUI entry.
GS1900 Series User's Guide
144